Design and Implementation of a GSM Based Wireless Power Transfer for AC or DC Load

Albert Kofi Kwansah Ansah

Abstract


This paper seeks to design and implement a Global System for Mobile Communication (GSM) based wireless power transmitter and receiver circuits for the control of various loads. The design is based on a self-resonating circuit which converts Direct Current (DC) to Alternating Current (AC) through a coupling coil. The results showed that power is effectively transferred wirelessly through resonance coupling technique. It was then concluded that the nearer the distance, the higher the voltage transferred. This system can be actuated remotely; thus has improved operational convenience and hence extends the frontiers of GSM technology by implication.


Keywords


Wireless Power Transmission, GSM, AC/DC Load, Resonance Coupling

Full Text:

PDF

References


Agarwal, T. (2016), “Opto-couplers, types and Applications”, www.elprocus.com. Accessed: April 21, 2016.

Ahmed, S.S., Yeong, T.W., and Ahmad, H.B. (2003), “Wireless power transmission and its annexure to the grid system”, IEE Proceedings: Generation, Transmission and Distribution 150, Vol. 2, pp. 195- 200.

Balouchi, P., Andreas Kaiser, B. L., Collard, D. and Buchaillot, L. (2007). “Complete system for wireless powering and remote control of electrostatic actuators by inductive coupling”, IEEE/ASME Transactions on Mechatronics, pp. 35-37.

Bhatt, A. M. (2012), “555 Timer IC: Introduction, Basics and Working with Different Operating Modes” www.engineersgarage.com. Accessed: April 21, 2016.

Bhutkar, R. and Sapre, S. (2009), “Wireless Energy Transfer using Magnetic Resonances”, ICCEE: International Conference on Computer and Electrical Engineering, pp. 21 – 35.

Budimir, D. and Marincic, A. (2006), “Research activities and future trends of microwave wireless power transmission”, Sixth International Symposium Nikola Tesla, pp. 56 – 89.

De Rooij, M. A. (2015), “A Supplement to GaN Transistors for Efficient Power Conversion”, Wireless Power Handbook, First Edition, pp. 4-7.

Harikiran. (2012), “How to Interface a GSM (SIM 300) Modem with ATmega32 to Send and Receive SMS”, www.engineersgarage.com. Accessed: May 2, 2016.

Karalis, A., Joannopoulos J.D. and Soljačić M. (2008), “Efficient wireless non-radiative mid-range energy transfer”, Annals of Physics, Vol. 323, No. 1, pp. 34–48.

Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J.D., Fisher, P., Soljačić, M. (2007), “Wireless power transfer via strongly coupled magnetic resonances”, Science Magazine 317, Vol. 83, pp. 83- 86.

Kushagra, T. (2012), “LCD”, www.engineersgarage.com. Accessed: April 5, 2016.

Rouse, M. (2005), “Inductor”, www.whatis.techtarget.com. Accessed: April 20, 2016.

Muhamad, R. and Sharma, S. (2015), “Wireless Power Transfer through Coils”, International Journal of Electrical and Electronics Engineering (IRG-IJEEE) – Volume 1, pp. 3-5.

Bhardwaj, N. (2011), “Capacitor”, www.murata.com. Accessed: April 21, 2016.

Prashansa, F., Aditya D., and Manish K. S., (2015). “Traveling magnetic field for homogeneous wireless power transmission”, IEEE Transactions on Power Delivery, pp. 12-14.

Summerer, E. M. and Barker D (2010), “Wireless Power by Magnetic Resonance: Theory, application, and control”, IEEE Standards Department, International Committee on Electromagnetic Safety, pp. 12-15.

Talamas, J. (2010), “Wireless Transmission of Energy: Evolution and Actual Technologies” Wireless Transmission of Energy, pp. 4-10.

Wageningen, K. and Waffenschmidt, R. (2016), “Wireless Power Transfer Using Resonant Inductive Coupling”, IEEE Transmission. Antennas Propagation pp. 8-11.


Refbacks

  • There are currently no refbacks.